top of page

Viper Hurricane

Please note prices are subject to change (08.10.24)

Viper Hurricane Hydraulic Camshaft

Viper Hurricane camshaft

DW262 Viper Hurricane Hydraulic Camshaft

Ideal for most applications, including automatic transmission. Worth an extra 20hp over a Std engine.

With the cylinder block and cylinder head faces not heavily machined, and the valve guides fitted to the correct length, this cam should bolt straight in.

DW262 specification   

RPM Range: Idle-6000rpm

In.200 Ex.200 @ .050"

Lift-1.60 Rockers In; .433" Ex; .433"

Hurricane cam p1.jpg

Just the Camshaft

DW262 Viper HURRICANE Hydraulic Camshaft  including Cam Lube.

​​Comp Cams running in oil (BY1590 x 6) and Comp Cams Break-In oil additive (BY159 Extra Zinc) required to protect the camshaft from damage during running in period). Non-compliance will negate the warranty.

Cam Kit (1)

  • DW262 VHURRICANE Hydraulic Camshaft with cam lube

  • Comp Cams Running in oil (x 6)

  • Comp Cams Break-in Oil Additive (x 1)

Comp Cams Break-In oil 1qt
Comp Cams Break-In additive

Cam Kit (2)

  • DW270 Viper TYPHOON Hydraulic Camshaft with cam lube and bolt

  • Comp Cams Running in oil

  • Comp Cams Break-in Oil Additive

  • Std. Hydraulic tappets/lifters/followers (set of 16)

  • Double valve springs (DW550)

  • Double valve spring top caps (DW520)

DW550 double springs

Cam Kit (3)

  • DW270 Viper TYPHOON Hydraulic Camshaft with cam lube and bolt

  • Comp Cams Running in oil

  • Comp Cams Break-in Oil Additive

  • Double valve springs (DW550)

  • Double valve spring top caps (DW520)

  • Shortened flow guides inlet (x8) (DW125)

  • Shortened flow guides exhaust (x8) (DW135)

  • Valve spring shims (BY6)

  • Std. Hydraulic tappets/lifters/followers (set of 16) for rpm less than 5000rpm Please call for alternative lifters in >5000rpm

  • Cloyes “Street True-Roller” set. Cast iron cam gear, Induction heat treated, billet steel crank gear [3 key ways], True-roller chain with .250” rollers. Made in the USA. (BY9-1132)

  • Rocker pillar preload shim kit (DW400)

  • Inlet manifold (valley) gasket Premium

  • Rubber end seals

Other gaskets included e.g. timing cover, water pump. Please give engine type/vehicle model when ordering

Cloyes duplex true  BY91132 timing set

Warranty

Comp Cams running in oil (BY1590 x 6) and Comp Cams Break-In oil additive (BY159 Extra Zinc) required to protect the camshaft from damage during running in period). Non-compliance will negate the warranty.

This website is the intellectual property of V8TUNING.CO.UK the trading name of P B Blackman Sportcars Ltd.

Co. Number 13102223 VAT Registration Number 369 5370 58 EORI Number GB079264577000

Last updated 29th January 2025

bottom of page