Carburettors

Holley 390cfm 4 barrel “4160” Carburettor manual choke

Holley 390cfm "Shiny version" Vacuum Secondary Carburettor 4-barrel

Comes ready calibrated for 3.5 Rover V8 Engines

Requires Edelbrock/Offenhauser Inlet Manifold.

Suitable for low bonnet clearance in MGBV8 conversions with Offenhauser inlet manifolds

Features:
Vacuum secondaries

Manual choke

Single inlet fuel bowl

Power valve protection

Primary jet 51

Secondary plate equivalent to a 53 jet

6.5 power valve

0.025” pump nozzle

Plain spring.

Complete with swivel union. Jetted for a standard Rover 3500 V8. Side hung floats. Has a "polished, shiny appearance".
Image show is for illustration purposes only as units supplied are not Gold Dichromate finish but the ball milled shiny versions.

Holley 390cfm carb.jpg

£478.97 incl. VAT : 20%

Please call or email for updated prices

Edelbrock AVS2 500cfm 4 barrel Square Bore Carburettor 1901

Edelbrock AVS2 500cfm square bore carburettor part number 1901

Designed & calibrated for small cubic inch engines such as 305 SBC, & 302SBF, & smaller.

Includes both timed & vacuum ports

MANUAL OR ELECTRIC CHOKE

Single/dual inlet fuel supply

Metering jets- primary - .095”, secondary .095”

Primary metering rod- .070” x .052”

Step up spring - orange 5” hg.

 

Includes both timed and full vacuum ports for ignition advance. #1901 is calibrated for single-quad applications and factory equipped with: Metering Jets - Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5' Hg). Use carb Studs #8008 or #8024 if needed.

If considering using this carb on stock or lightly modified 3.5 litre engines, also consider the stock 500cfm carb as most find this carb easier to tune, as this capacity engine has less manifold vacuum than the 3.9 + litre engines (see next entry).

Supplied with carb centre stud, instructions and installation DVD.

Edelbrock AVS2 500cfm 1901.jpg

Manual Choke

£423.46 incl. VAT : 20%

Electric Choke

£468.03 incl. VAT : 20%

Please call or email for updated prices

Edelbrock Performer 500cfm 4 barrel Square Bore Carburettor 1404

Edelbrock 500cfm square bore carburettor part number 1404

Designed & calibrated for small cubic inch engines such as 305 SBC, & 302SBF, & smaller. Satin finish.

Includes both timed & vacuum ports

MECHANICAL CHOKE

Single inlet fuel supply

Metering jets - primary - .086”, secondary .095”

Metering rods- .065” x .052”

Step up spring- orange 5” hg.

Edelbrock 500cfm 1404 manual choke.jpg

£468.85 incl. VAT : 20%

Please call or email for updated prices

Edelbrock 600cfm carburettor manual choke 1405

Edelbrock 600cfm Square Bore Carburettor 1405

To suit larger capacity Rover V8 Engines as well as SBF/SBC Mopar etc.

Designed & calibrated for optimum street performance in small block & some big-block engines. These carbs can be used with “Performer & Performer RPM” style of manifolds. Includes both timed & vacuum ports

MANUAL CHOKE

Timed and vacuum ports
Single Inlet Fuel Supply
Metering Jets Primary .100" Secondary .095"
Metering Rods.070 x .047"
Step-up spring Orange 4hg
Rebuild kit available

£419.05 incl. VAT : 20%

Please call or email for updated prices

Choke Cable Edelbrock/Holley stiff 72"/6ft

Choke cable assembly.

Has a stiff inner wire to overcome choke mechanisms
that are resistant to movement, like the 600 Holley.

Edelbrock Holley Choke Cable BY2078.JPG
Edelbrock Holley Choke BY2078 back.JPG

£22.50 incl VAT @ 20%

Much more to come