top of page

Please note prices are subject to change (17.06.25)

Clutch Slave Cylinder FTC5072

Rover SD1, TVR, MGB V8, Triumph TR8 V8 Clutch Slave Cylinder FTC5072

To Suit LT77, R380 & T5 Gearboxes.
These are good quality replacements not OE. Supplied complete with bleed nipple.
For::
TVR Giffith 4.0, 4.3, 4.5, 5.0L
MGB V8 3.5L and 3.9L
Rover Sd1 3500
Rover P5b/P6
Morgan + 8 3.5, 3.9, 4.6L

Clutch slave cylinder

£8.40 Incl. VAT @ 20%

Clutch release bearing for LT77 and T5 EQ3264500

This clutch release bearing is suitable for:

Rover SD1 2WD clutch assemblies to approx 1979
TVR Griffith and Chimera T5 Applications

clutch release bearing LT77 T5

£17.50 Incl. VAT @ 20%

Clutch release bearing FTC5200

Clutch release bearing assembly FTC200

Discovery 1, 2, Range Rover P38, Range Rover Classic

Clutch release bearing assembly

£7.59 Incl. VAT @ 20%

Clutch release bearing GRB90247

GRB90247 Standard, Self-Centering clutch release bearing Heavy duty

Carrier sleeve and bearing

For:

LT77 gearbox

TR8 / ROVER SD1 V8

GRB90247 release bearing

£65.00 Incl. VAT @ 20%

Flywheels

Rover V8 Super Lightweight Flywheel approx. 6.85kg 1527

Rover V8 Steel Billet Lightweight Flywheel for V& 2WD applications.

Dual Drilled for 9.5" and 10.5" UK clutch assemblies.
Clutch Location Dowels Supplied

Balanced


American made clutches, Chevrolet Clutches are similar but not the same to UK spec clutches and some machining may be required to fit.

Why have a lightweight flywheel?

 (a) If 1kg is removed from the flywheel, in first gear this equates to about 40 kg removed from the chassis.
This will not have the same effect in higher gears. However if higher acceleration in the lower gears is wanted a super lightweight flywheel will do the job.

(b) Being about 1/3rd the weight of a standard flywheel will allow the engine to spin up faster with reduced inertia giving more power to the wheels. Potential energy (kinetic) is not stored in the flywheel.

These are premium grade units and are complete with integral ring gear.
Drilled for 9.5" diameter clutch (STD 2WD) or 10.5" clutch with clutch locating dowels. 9.5" Clutch uses M8 Bolts and not UNF as per the standard Rover V8 2WD flywheel.

 

Note : The centre bore of these flywheels is machined to enable a tight fit over the crankshaft mounting boss. This is intentional to prevent potential flywheel in balance as per the factory flywheels. P.B Blackman 2019

lightweight V8 flywheel

£394.51 Incl. VAT @ 20%

Super light flywheel 1527 dimensions

This website is the intellectual property of V8TUNING.CO.UK the trading name of P B Blackman Sportcars Ltd.

Co. Number 13102223 VAT Registration Number 369 5370 58 EORI Number GB079264577000

Last updated 29th May 2025

bottom of page