top of page

Manifold Accessories

Please note prices are subject to change (11.02.24)

Thermostat Housing Edelbrock inlet manifold Offenhauser Dual Plane

Thermostat housing plus gasket

 

May be required in place of SU/Stromberg Manifold Thermostat Housing to maintain sufficient distributor movement
Made of Aluminium Alloy

Edelbrock thermostat housing

£36.00 incl. VAT @ 20%

Thermostat 82 deg.  + Jig Pin 602687G

82 degree thermostat part number 602687G

Premium Range

NB Rover V8 engines prefer less than 80 degrees for maximum engine reliability and preservation

Thermostat 82 or 88 deg

£9.50 incl. VAT @ 20%

Thermostat 74 / 75 degree ETC4761G OE

With jig pin

£6.50 Incl. VAT @ 20%

ETC4761G 75 degree thermostat

£9.50 incl. VAT @ 20%

ARP Stainless Inlet Manifold Bolts - Stainless Steel

ARP Inlet manifold Bolt set in Stainless steel

 

More durable than the standard mild steel bolts.

Look good and less likely to rust

ARP Stainless steel inlet manifold bolts

£62.50 incl. VAT @ 20%

Black 12pt bolts £52.55 incl. VAT @ 20%

Temperature Sender 568055

Temperature sender transmitter part number 568055

For SU/Stromberg or Edelbrock / Offenhauser inlet manifolds

Complete with sealing washer

temperature sender 568055

£4.50 incl. VAT @ 20%

Edelbrock / Offenhauser Rear Coolant to Heater Outlet 603440

Heater Outlet Connector part number 603440

 

Locates on the rear/back of the intake manifold to allow connection to your heater valve (usually mounted on the bulkhead)
Supplied with Gasket

Rear cooler to heater outlet 603440

£44.19 incl. VAT @ 20%

Moroso Insulated Header Wrap 80808 2” x 1/16” x 50ft roll

Moroso Insulated Exhaust Header Wrap 80808 2” x 1/16” x 50ft roll

​

Made from a silica based formula. No asbestos. Prevents starter motor, starter wiring and plug leads from getting burnt.
Reduces under bonnet temperatures. Increases exhaust cycle efficiency.

​

Can also be used on motorbike exhausts.

Moroso header wrap BY80808

£59.99 incl. VAT @ 20%

bottom of page