top of page

GEMS Thor custom camshaft

Please note prices are subject to change (30.03.23)

The camshaft within the kits on this page was designed to have multiple applications. Manufactured for us by Kent Cams and given the part number HP1041-42, they are ground to the same custom specification. The only difference between some applications is that the HP1041-42 will be either a long nose or short nose type. This camshaft will not be found on the Kent Cams website as it is unique.

To read about who thought of such a camshaft go to the Who are we? page.

Use a high quality running-in oil e.g Comp Cams to support warranty

Specification
Lobe Sep 112 Deg
Lobe Lift (mm) In 6.49 Ex 6.52
Valve Lift (mm) In. 10.29 Ex 10.32
Duration 247.5 / 260 Deg.

HP1041-42 short nose version

Just the camshaft

£269.98 incl. VAT @ 20%

Range Rover P38 GEMS or Thor High Torque Cam Kits

Cam Kit 1

Range Rover P38 GEMS or Thor High Torque Cam Kit
All parts made in USA,UK or European Union where possible.

Kit Contents Include :
Kent Cams HP1041-42 High Torque Camshaft for 4.0 or 4.6 Engine (no nose for non-distributor engines)
*16 x Lifter Set (
Higher spec lifters available)
USA Timing Chain
Cam Sprocket, Crank Gear (made in China - no other options)

* Cost of lifters / followers has increased by about 30%

RR P38 Thor image kit

£428.93 incl. of VAT @ 20%

Cam Kit 2

Range Rover P38 GEMS or Thor High Torque Cam Kit

Kit Contents Include :
1 x Kent Cams HP1041-42 High Torque Camshaft for 4.0 or 4.6 Engine
*16 x Lifter Set (
Higher spec lifters available)
Set USA Timing Chain made in the USA
Cam Sprocket, Crank Gear (made in China - no other options)
1 x Composite Valley Gasket made in the UK
2 x Rubber End Seals made in the UK
2 x Rocker Cover Gaskets made in the UK

* * Cost of lifters / followers has increased by about 30%

RR P38 Thor image kit 2

£468.93 incl. of VAT @ 20%

bottom of page