Mild Road Camshafts
Kent Cams Performance H200 Mild Road Long Nose Cam 20bhp increase
Cam Lift (mm) 6.83mm Inlet/ 7.18mm Exhaust
Duration 208/218 Deg Inlet / Exhaust
Full Lift Inlet 108 Deg ATDC
LTDC 0.83mm Inlet
Timing 23/67 68/34
Valve Lift (mm) 10.89mm Inlet 11.50mm Exhaust
VC (mm) Hydraulic
Power 1000-4500 rpm
Manufactured from Chilled Iron using CNC machinery for 100% accuracy.
High Lift Hydraulic Camshaft H200.
For suitable valve springs, cam followers
Suitable for automatics and off road
Notes: Requires Up-rated Single valve springs & shim kit or adjustable push rods.
Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty
Just the Camshaft
H200 long nose camshaft with cam bolt and cam lube
Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty
H200 Cam Kit (1)
-
Kent Cams Performance Mild Road H200 Hydraulic Cam with Comp Cams Cam Lube & cam bolt
-
Hydraulic tappets/lifters/followers (set of 16) Made in U.S.A. AZ794-16 or similar quality
-
Kent Cams performance single valve springs (set) VS44
Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty
H200 Cam Kit (2)
-
Kent Cams Performance Mild Road H200 Hydraulic Cam with Comp Cams Cam Lube & cam bolt
-
Hydraulic tappets/lifters/followers (set of 16) Made in U.S.A. AZ794-16 or similar quality
-
Kent Cams performance single valve springs (set) VS44
-
Kent Cams Roll Chain Vernier Duplex Timing Chain kit S29
Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty
H200 Cam Kit (3)
-
Kent Cams Performance Mild Road H200 Hydraulic Cam with Comp Cams Cam Lube & cam bolt
-
Hydraulic tappets/lifters/followers (set of 16) Made in U.S.A. AZ794-16 or similar quality
-
Kent Cams performance single valve springs (set) VS44
-
Kent Cams Roll Chain Vernier Duplex Timing Chain kit S29
-
Inlet manifold (valley) gasket Premium OE LKJ500020G
-
Rubber end seals OE ERR7283
-
Rocker Cover gaskets Premium OE LVC100260G
-
Other gaskets included e.g. timing cover, water pump. Please give engine type/vehicle model when ordering
Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty
Representative content
Warranty
Camshaft and other Kent Cams products issues: if you think the camshaft you have purchased has a problem, it needs to be returned to us. We will then forward it to be inspected by Kent Cams and await their feedback before refunds can be issued.