Camshafts Kent Cams

Kent Cams camshafts H180, H200, H214, H218, M238, M256

The cam kits on this page can be changed

If you do not see what you need please contact:

01953 60070

or email: salesv8tuning.co.uk@gmail.com

Kent Cams Sports Torque H180 Hydraulic Cam suitable for automatics and off-road +22bhp

Click on the link above. Type in the camshaft part number to find detailed information

Kent Cams H180

H180 specification   

Cam Lift (mm) 7.01mm Inlet/Exhaust

Duration 262° Inlet/Exhaust 

Full Lift Inlet 108° ATDC (At Top Dead Centre)

LTDC 1.42mm Inlet (Lift at Top Dead Centre)

Timing 23/59 59/23 

Valve Lift (mm) 11.20mm Inlet/Exhaust

VC (mm) 0.00mm Inlet/Exhaust (Variable compression)

Power Band 1000-4500 

H180 Kent Camshaft long nose

Just the Camshaft

Kent Sports Torque H180 Hydraulic Cam suitable for automatics and off-road +22bhp with Comp Cams Cam Lube & cam bolt

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

H180 Cam Kit (1)

  • Kent Sports Torque H180 Hydraulic Cam suitable for automatics and off-road +22bhp with Comp Cams Cam Lube & cam bolt

  • Hydraulic tappets/lifters/followers (set of 16) Made in U.S.A. AZ794-16 or similar quality

  • Kent Cams performance single valve springs (set) VS44  

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Kent cams single springs

H180 Cam Kit (2)

  • Kent Sports Torque H180 Hydraulic Cam suitable for automatics and off-road +22bhp with Comp Cams Cam Lube & cam bolt

  • Hydraulic tappets/lifters/followers Made in U.S. A.  (set of 16) AZ794-16 or similar quality

  • Kent Cams Performance single valve spring set VS44

  • Kent Cams Roll Chain Vernier Duplex Timing Chain kit S29

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Kent Cams timing set Vernier

H180 Cam Kit (3)

  • Kent Sports Torque H180 Hydraulic Cam suitable for automatics and off-road +22bhp with Comp Cams Cam Lube & cam bolt

  • Hydraulic tappets/lifters/followers Made in U.S. A.  (set of 16) AZ794-16 or similar quality

  • Kent Cams Performance single valve spring set VS44

  • Kent Cams Roll Chain Vernier Duplex Timing Chain kit S29

  • Inlet manifold (valley) gasket Premium OE LKJ500020G

  • Rubber end seals OE ERR7283

  • Rocker Cover gaskets Premium OE LVC100260G

  • Other gaskets included e.g. timing cover, water pump. Please give engine type/vehicle model when ordering

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Kent Cams Performance H214 Camshaft Sports TVR 3.9, 4.5L and Rover V8 engines

Kent Cams H214 applications

Information/Description click HERE for the source of this information:

KC Performance H214 Camshaft Sports TVR 3.9, 4.5L Engines and Rover V8 Engines

Manufactured from Chilled Iron and custom ground using CNC machinery for 100% accuracy.
High Lift Hydraulic Camshaft.
Best performance cam for road/track day applications and suitable for 3.9 and larger capacity Rover engine using Flapper or Hot-wire Injection. Okay on carbs too, 4 barrel etc. Nose is ground for cam retaining plate (circular style).

Specification H214

Cam Lift (mm) 7.36mm Inlet 7.77 Ex. 11mm

Duration 278 Deg Inlet/ 284 Deg Exhaust

Duration at 1mm 226° Inlet / 234° Exhaust

Full Lift Inlet 111 Deg ATDC (At Top Dead Centre)

LTDC 1.57mm Inlet (Lift at Top Dead Centre)

Timing 31/73 78/40

Valve Lift (mm) 11.90 Inlet  12.44 Exhaust

VC (mm) 0.00mm Inlet/Exhaust (Variable compression)

Power Band 1500-5000

Kent cams long nose cam

Just the Camshaft

H214 Non-GEMS camshaft with cam bolt and cam lube

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Double springs and top caps required MACHINING REQUIRED

H214 Cam Kit (1)

  • H214 Non-GEMS camshaft with cam bolt and cam lube

  • Performance valve springs (double) Made in the USA DW550 or similar quality

  • Valve spring retainers Made in the USA DW520

MACHINING REQUIRED to the heads etc. to accommodate the double springs

 

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

 

DW550 double springs

H214 Cam Kit (2)

  • H214 Non-GEMS camshaft with cam bolt and cam lube

  • Hydraulic tappets/lifters/followers Made in U.S. A.  (set of 16) AZ794-16 or similar quality

  • Performance valve springs (double) Made in the U.S.A. DW550 or similar quality

  • Valve spring retainers Made in the U.S.A. DW520

  • Kent Cams Roll Chain Vernier Duplex Timing Chain kit S29

MACHINING REQUIRED to the heads etc. to accommodate the double springs

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Kent Cams Vernier Duplex timing set

H214 Cam Kit (3)

  • H214 Non-GEMS camshaft with cam bolt and cam lube

  • Hydraulic tappets/lifters/followers Made in U.S. A.  (set of 16)

  • Performance valve springs (double) Made in the USA

  • Valve spring retainers Made in the USA

  • Kent Cams Roll Chain Vernier Duplex Timing Chain kit

  • Inlet manifold (valley) gasket Premium

  • Rubber end seals

  • Rocker Cover gaskets Premium

  • Other gaskets included e.g. timing cover, water pump. Please give engine type/vehicle model when ordering

MACHINING REQUIRED to the heads etc. to accommodate the double springs

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Kent cams full set.jpg

Kent Cams  Performance H218 Camshaft Fast Road 3.5, 3.9, 4.6, 5.0  26bhp approx. increase

H218 applications.JPG

SPECIFICATION H218

Cam Lift (mm) 7.11mm Inlet/7.36mm Exhaust

Duration 278 Deg Inlet/ 284 Deg Exhaust

Duration at 1mm 226° Inlet / 234° Exhaust

Full Lift Inlet 112 Deg ATDC (At Top Dead Centre)

LTDC 1.65mm Inlet (Lift at Top Dead Centre)

Timing 27/71 74/30

Valve Lift (mm) 11.38mm Inlet/1.78mm Exhaust

VC (mm) 0.00mm Inlet/Exhaust (Variable compression)

Power Band 1500-5000

Just the Camshaft

H218 Non-GEMS camshaft with cam bolt and cam lube

 

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

H218 Cam Kit (1)

  • H218 Non-GEMS camshaft with cam bolt and cam lube

  • Hydraulic tappets/lifters/followers (set of 16) Made in U.S.A. or of similar quality

  • Kent Cams performance single valve springs (set) VS44    

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Kent cams single springs VS44

H218 Cam Kit (2)

  • H218 Non-GEMS camshaft with cam bolt and cam lube

  • Hydraulic tappets/lifters/followers Made in U.S. A.  (set of 16)

  • Kent Cams Performance single valve spring set

  • Kent Cams Roll Chain Vernier Duplex Timing Chain kit

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

 

H218 Cam Kit (3)

  • H218 Non-GEMS camshaft with cam bolt and cam lube

  • Hydraulic tappets/lifters/followers Made in U.S. A.  (set of 16) or of similar quality

  • Kent Cams Performance single valve spring set

  • Kent Cams Roll Chain Vernier Duplex Timing Chain kit

  • Inlet manifold gasket (Premium range)

  • Inlet manifold gasket rubber end seals (x 2)

  • Other gaskets included e.g. timing cover, water pump. Please give engine type/vehicle model when ordering

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Kent Cams Vernier Duplex timing set
Kent Cams Performance H200 Mild Road Long Nose Cam
H200 Kent cams page.jpg

Cam Lift (mm) 6.83mm Inlet/ 7.18mm Exhaust

Duration 208/218 Deg Inlet / Exhaust

Full Lift Inlet 108 Deg ATDC

LTDC 0.83mm Inlet

Timing 23/67 68/34

Valve Lift (mm) 10.89mm Inlet  11.50mm Exhaust

VC (mm) Hydraulic

Power 1000-4500 rpm

Manufactured from Chilled Iron using CNC machinery for 100% accuracy.
High Lift Hydraulic Camshaft H200.
For suitable valve springs, cam followers
Notes: Requires Up-rated Single valve springs & shim kit or adjustable push rods.

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Just the Camshaft

H200 long nose camshaft with cam bolt and cam lube

 

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Cam kits 1, 2 and 3 can be purchased for the H200 - please phone 01953 600070 or email salesv8tuning.co.uk@gmail.com

Kent Cams M238 Competition Mechanical Camshaft
Kent Cams M238 applications

Manufactured from Chilled Iron and custom ground using CNC machinery for 100% accuracy.

To suit Rover V8 3.5, 3.9, 4.0, 4.6 & 5.0L Engines.

Machined to accept Cam Retaining Plate Long Nose Type for engines originally equipped with distributor.

Application - Competition

For suitable valve springs, cam followers and VS installed height.

Requires double valve springs (machining to accommodate double springs)

Solid mechanical lifters.

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

M238 Specification
Cam Lift 8.05mm In/Ex.
Valve Lift (mm) 12.32 In/Ex.
Duration: 284 Deg Inlet / 290 Deg Exhaust
Timing 34/70 73/37
Full Lift: Inlet 108 Deg ATDC (At Top Dead Centre)
LTDC 2.71mm (Lift at Top Dead Centre)
Power 2750 - 7000rpm

Just the Camshaft

M238 long nose camshaft with cam bolt and cam lube

 

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

H238 Cam Kit (1)

  • H238 camshaft with cam bolt and cam lube

  • Kent Cams Solid mechanical lifters/followers (set of 16) CF23

  • Kent Cams performance single valve springs (set) VS44  or Double VS43 with valve spring retainers ST47

  • Kent Cams Vernier Duplex Timing Set S29

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Kent Cams timing.JPG
Kent Cams mechanical tappets
Kent Cams Performance M256 Race and Rally Camshaft
M256 applications.jpg

M256 Specification

Cam Lift (mm) 8.58mm Inlet  8.89mm Exhaust

Duration 304 Deg Inlet 310 Deg Exhaust

Full Lift Inlet 104 Deg ATDC (At Top Dead Centre)

LTDC 4.01 mm Inlet (Lift at Top Dead Centre)

Timing 48/76 87/43

Valve Lift (mm) 13.05mm Inlet/ 13.56mm Exhaust

VC (mm) 0.66mm Inlet/Exhaust (Variable compression)

Manufactured from Chilled Iron and custom ground using CNC machinery for 100% accuracy.

Long Nose Type for engines originally equipped with distributor.
To suit 3.5, 3.9, 4.0, 4.6 & 5.0L Engines. Please state engine application when ordering.
Modifications required and installation checks should be made.

Notes: Requires double valve springs & Solid Mechanical Lifters

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Just the Camshaft

H256 long nose camshaft with cam bolt and cam lube

 

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

H256 Cam Kit (1)

  • H256 camshaft with cam bolt and cam lube

  • Kent Cams Solid mechanical lifters/followers (set of 16) CF23

  • Kent Cams performance single valve springs (set) VS44  or Double VS43 with valve spring retainers ST47

  • Kent Cams Vernier Duplex Timing Set S29

Use a high quality running-in oil e.g. Comp Cams break-in oil to support standard warranty

Kent Cams CF23

Warranty

Camshaft and other Kent Cams products issues: if you think the camshaft you have purchased has a problem, it needs to be returned to us. We will then forward it to be inspected by Kent Cams and await their feedback before refunds can be issued.